
6555 10,000V/15,000V Megohmmeters
The Megohmmeter Model 6555 is a high-end portable measuring instrument intended for the measurement of a wide varity of electrical insulation resistance values on cables and devices operating at high voltage. It is the only fully automated 15,000V graphical insulation tester. The Model 6550 is packaged in a rugged case that is IP54 when closed. Test results and configuration information is provided on a graphical LCD screen as well as exportable through the use of DataView® software provided. This megohmmeter can operate on battery or AC power while testing.
The Model 6555 also offers the ability to program up to three step voltage profiles (from 40 to 15,000V), each containing up to ten steps. There are also three ramp profiles and three programmable test voltages in addition to the standard fixed voltages of 500, 1000, 2500, 5000, 10,000 and 15,000V.
AEMC 6555 (15,000V) Digital Megohmmeter
- Wide measurement range from 10kΩ to 30TΩ
- Fixed or programmable test voltage from 40V to 10kV
- 5mA charging current
- Step voltage testing
- Ramp voltage testing
- Large backlit graphical LCD screen with digital display, bargraph and R(t)+v(t), i(t) and i(v) graphs
- Automatic calculation of DAR / PI / DD /ΔR (ppm/V) ratios
- Multiple test modes: voltage ramp and step with “burning”, “early break” and “I-limit” modes
- Three filters to optimize measurement stability
- Calculation of R at referrence temperature
- Storage of 80,000 measurements
- Optically-isolated USB communication for transfer onto PC and report generation with DataView® software
Spesifikasi – AEMC 6555 (15,000V) Digital Megohmmeter
- Test Voltage: 500V : 10kΩ to 2000GΩ (2TΩ). 1000V: 10kΩ to 4000GΩ (4TΩ). 2500V: 10kΩ to 10,000GΩ (10TΩ). 5000V: 10kΩ to 15,000GΩ (15TΩ). 10,000V: 10kΩ to 25,000GΩ (25TΩ). 15,000V: 10kΩ to 30,000GΩ (30TΩ)
- Fixed Test Voltage: 500/1000/2500/5000/10,000V/15,000
- Variable Voltage: Variable: 40V to 15kV . Three user programmable voltage schemes
- Ramp Mode : Programmable ramps: start voltage/end voltage/duration
- Ramp Configuration Range: 40 to 1100V/500 to 15,000V
- Step Mode: Up to 10 steps (voltage and duration configurable for each step)
- Voltage Measurement After Test : 0 to 2500Vac; 0 to 4000Vdc
- Capacitance Measurement: 0.05 t0 9.999µF/10.00 to 49.99µF
- Leakage Current Measurement : 0 to 8 mA
- Discharge After Test: Yes/Automatic
- Additional Test Stop Models: I-Limit: Programmable: 0.2 to 5mA. early-Break: di/dt. Timer: Up to 99 minutes 59 seconds
- Burn Mode: Constant Testing
- Ratio Calculation: PI, DAR, DD
- Calculation of R at ref. T: Yes
- Measurement Display Filter: 3 filters with 3 possibletime-constants
- Graphs on display: R(t)+v(t); i(t); i(v)
- Communication: USB optically-isolated port
- PC Software: DataView Software
- Power Supply: NiMH rechargeable batterries, two 9.6V 4Ah battery packs charging by external voltage: 90 to 260V; 50/60Hz
- Battery Charging: Battery Charging allowed while performing insulation measurements
- Electrical Safety: 1000V CAT IV; IEC61010-1 and IEC 61557
- EMC, Mechanical Protection, Altitude: EN 61326-1, IP54, 3000m
- Dimensions: 13.39 x 11.81 x 7.87″ (340 x 300 x 200mm)

Belum ada ulasan untuk produk Harga Jual AEMC 6555 (15,000V) Digital Megohmmeter