Harga Jual HI-Target HTS-220R Total Station

The HTS-220R total station is configured with dual-axis compensator to realize the error elimination and auto accuracy compensation.

Product Features
Absolute Encoding
With the absolute encoding disk, this product has high accuracy, high efficiency and stable performance. The initialization is only used to measure the angle when the product is switched on. Even the power supply is cut off unexpectedly, the azimuth information will not lose.

High-performance MCU
The ARM Cortex™-M processor based STM 32 MCU brings high processing speed but low-power consumption to the HTS-220R total station.

Bluetooth
Manufactured with Bluetooth wireless technology, the product can be used together with any data collector for real-time communication. The software of the third party like Carlson SurvCE is also usable with this product.

Data Storage
The data transfer can be conducted via SD card, USB pen drive and mini-B interface.

Backlight
There are backlights designed for the display and the keyboard. So it is convenient for you to use the product in darkness.

Diagonal Eyepiece
The diagonal eyepiece makes for the comfortable observation of steep sight.

Calibration Software
To ensure the trouble-free operation, this HTS-220R total station is designed with proprietary HI-TARGET Calibration software for the real-time diagnosis.

Data Transfer Software
Capable of being used in AutoCAD or the post processing software of other brands, the proprietary data transfer software is installed to support the different type of output data format.

Specifications
Angle Measurement
Measurement Method: Absolute encoding
Minimum Readout: Adjustable among 1″/5″/10″(0.3mgon/1.5mgon/3mgon)
Accuracy¹: 2″
Distance Measurement (with reflector)
Single Prism: 3000m (9,842ft) under good condition³
Three Prisms: 6000m (19,685ft) under good condition³
Reflective Area: 800m (2,624ft)
Accuracy : 2 mm+2ppm
Measuring Time (Fine/Quick/Tracking): 1.5s/1s/ 0.5s
Distance Measurement (without reflector)
Reflectorless² Range: 350m (1,148ft)
Single Prism: >7500m (24,606ft)
Accuracy : 3mm+2ppm
Measuring Time: 1.5s
Telescope
Magnification: 30×
Field of View: 1°30′ (2.7m at 100m)
Minimum Focusing Distance: 1.5m
Reticle: Illuminated
Compensator
System: Single-axis liquid tilt sensor/Dual-axis (optional)
Working Range: ±3′
Setting Accuracy: 1″

Communication System
Bluetooth
Interface: Standard RS232, SD card⁴, USB pen drive, mini-B
Data Format: ASCII

Operation
Operation system: Real-time operating system
Display: High resolution backlight, black and white display with contrast adjustment
Graphics: 280×160 pixels/Character: 6 lines×25 characters
Keyboard: 2 sides alphanumeric backlit crystal keyboard

Laser Plummet
Type: Laser point, 4 brightness levels adjustment/Optical plummet (optional)
Centering Accuracy: 1 mm at 1.5m height of instrument

Power Supply
Battery Type: Rechargeable Li-ion battery
Voltage/Capacity: ZBA-400: 7.4V (DC)/3000mAh
Operating Time With ZBA-400: Optimal 16 hours⁵ (Continuous angle measurement every 30 seconds)/10 hours (typical)
Measuring Times: Approx. 12000 times

Weight(including battery and tribrach)
Approx: 5.5kg (12.1lb)

Environmental Conditions
Operating Temperature: -20℃-+50℃ ( -4℉ to +122℉)
Storage Temperature: -40℃-+70℃ (-40℉to +158℉)

Dust & Water Proof (IEC60529 Standard)/Humidity
IP65, 95%, non-condensing

Note
1. The standard deviation conforms to ISO 17123-3 standard.
2. Calculated by the white side of Kodak Gray Card with 90% reflectivity, the precise distance shall be dependent on the measuring tool, observation and environment conditions.
3. The optimal conditions mean no haze, moderate sunlight and the visibility of 40km.
4. The maximum storage is up to 32GB.
5. The measuring time is calculated with new battery at 25℃ with the working mode of 24-hour continuous surveying.