
| FEATURES |
| Filter Probe
● Works with any Tone Generator to identify wires.
● Volume control for increasing sensitivity and
adjustable to suit work environment.
● 2 operation modes: Filter on / Filter off.
● The auto-off function (5 minutes) prevents battery
consumption.
● Power supply is available in any 9V battery with a
life of approximately 50 hours.
● A phone jack is designed for headset or handset.
● Flashlight function.
Tone Generator
● Tone Generator is a great tool for locating and
identifying cable pairs or individual conductors.
● 162 CB-G doesn’t only provide the function of a
tone generator, but also serves as a continuity and
polarity tester.
● A tone selector switch located inside the unit for
selection of the fast tone or the slow tone.
● Two bi-colored LEDs for Line1 and Line 2 indication
of the polarities of the telephone lines.
● The unit has alligator type terminals, a modular
cable of 4 conductors with a strong connector.
● The tone and continuity functions are only applied
to Line1. (Modular connector) |
|
| SPECIFICATIONS |
|
| Filter Probe |
|
|
| Operation mode |
Filter on (avoid the interference of 50Hz/60Hz) |
| Filter off |
| Receiver distance |
< 50cm |
| Sensitivity control |
ˇ |
| Probe tip |
Fixed |
| Power source |
9V battery × 1 |
| Dimensions |
250(L) × 39(W) × 38(D)mm |
Weight
(battery included) |
Approx. 180g |
| Tone Generator |
|
|
| Wave form |
Square Wave |
| Frequency |
1kHz±15% |
Over voltage
protection |
80V DC |
| Alternating tone |
Fast and Slow |
| Connection |
RJ11 connector, alligator clip x 2,
RJ45 connector (optional) |
| Power source |
9V battery × 1 |
| Dimensions |
86(L)×63(W)×26(D)mm |
Weight
(battery included) |
Approx. 130g |
| General |
|
|
Operating temp &
humidity |
0˚~40˚C, 80% Max. |
Storage temp &
humidity |
-10˚~50˚C, 80% Max. |
| Safety standard |
EN 61326-1 EN 55011
EN 61000-4-2 EN 61000-4-3 |
|
|
|

Belum ada ulasan untuk produk Harga Jual SEW Cable Tracers 162 CB