Harga Jual Megger MIT200 500V Digital / Analog Insulation & Continuity Tester

1 kV insulation and continuity testers

With over twenty 1-kV models to choose from, selecting the proper Megger insulation tester can appear a bewildering task at first. Actually all the process requires is a little organization. All Megger insulation testers perform essentially the same test in fundamentally the same manner — accurately and reliably. Refinements and added features, however, separate one model from another in application and operator appeal.

Make a check list of important or essential features and specifications. This should automatically reduce the choices to a workable number from which personal preferences can easily determine the final selection.

Megger MIT200 500V Digital / Analog Insulation & Continuity Tester

• Test Voltage: 500 V
• Insulation testing to 1000 M-ohm
• Continuity testing at 200 mA down to 0.01 ohms
• Live circuit warning (voltage display) and test inhibit
• Digital/Analog display
• Alkaline or rechargeable batteries
• –10ºC to +55ºC operating temperature
• CATIII 600 V
• Conforms to EN61557-1

Beli Megger MIT200 500V Digital / Analog Insulation & Continuity Tester dengan harga kompetitif dan cari produk dari Test & Measurements, Gratis antar Jakarta dan dapat dikirim keseluruh Indonesia. Dapatkan hanya di toko online kucari, belanja online mudah dan aman.

Spesifikasi – Megger MIT200 500V Digital / Analog Insulation & Continuity Tester

Insulation Ranges

• Nominal Test Voltage:     500 V
• Measuring Ranges:     10 K-ohm – 1000 M-ohm on all ranges
• Terminal Voltage on open Circuit:     -0% +25% of rated voltage
• Short Circuit Current:     2mA, 1mA – 10mA
• Test Current On Load:     >1 mA at minimum pass values of insulation
• Accuracy:     ±3% of reading ±2 digits up to 10 M-ohm
• ±5% of reading ±2 digits up to 100 M-ohm
• ±30% of reading up to 1000 M-ohm

Continuity Ranges

• Measuring Range:     0.01 ohms to 100.0 ohms (0 – 50 ohms on analog scale)
• Accuracy:     ±3% of reading ±2 digits up to 10 M-ohm; ±5% of reading ±2 digits up to 100 M-ohm ;  ±30% of reading up to 1000 M-ohm
• Open Circuit Voltage:     5V ±1V
• Test Current:     205 mA, ±5 mA @ (0 – 10 ohms) > 20mA up to 100 ohms
• Zero Offset Adjust:     0 to 9.99 ohms

General

• Power Supply:     6 x 1.5 V Alkaline cells IEC LR6 type
• Battery Life:     Typically up to 3500, 5 second tests
• Operating Temperature:     -10ºC to 55ºC
• Operating Humidity:     93% Relative Humidity at 40ºC max
• Storage Temperature:     -25ºC to 65ºC
• Dimensions:     195mm (L) x 98mm (D) x 40mm (H)
• Weight:     550g