Harga Jual Megger MIT210 1000V Digital / Analog Insulation & Continuity Tester

1 kV insulation and continuity testers

With over twenty 1-kV models to choose from, selecting the proper Megger insulation tester can appear a bewildering task at first. Actually all the process requires is a little organization. All Megger insulation testers perform essentially the same test in fundamentally the same manner — accurately and reliably. Refinements and added features, however, separate one model from another in application and operator appeal.

Make a check list of important or essential features and specifications. This should automatically reduce the choices to a workable number from which personal preferences can easily determine the final selection.

Megger MIT210 1000V Digital / Analog Insulation & Continuity Tester

• Test Voltage: 1000 V
• Insulation testing to 1000 M-ohm
• Continuity testing at 200 mA down to 0.01 ohms
• Live circuit warning (voltage display) and test inhibit
• Digital/Analog display
• Alkaline or rechargeable batteries
• –10ºC to +55ºC operating temperature
• CATIII 600 V
• Conforms to EN61557-1

Beli Megger MIT210 1000V Digital / Analog Insulation & Continuity Tester dengan harga kompetitif dan cari produk dari Test & Measurements, Gratis antar Jakarta dan dapat dikirim keseluruh Indonesia. Dapatkan hanya di toko online kucari, belanja online mudah dan aman.

Spesifikasi – Megger MIT210 1000V Digital / Analog Insulation & Continuity Tester

Insulation Ranges     

• Nominal Test Voltage:  1000 V
• Measuring Ranges:  10 K-ohm – 1000 M-ohm on all ranges
• Terminal Voltage on open Circuit:  -0% +25% of rated voltage
• Short Circuit Current: 2mA, 1mA – 10mA
• Test Current On Load:  >1 mA at minimum pass values of insulation
• Accuracy:   ±3% of reading ±2 digits up to 10 M-ohm; ±5% of reading ±2 digits up to 100 M-ohm;  ±30% of reading up to 1000 M-ohm

Continuity Ranges

• Measuring Range:   0.01 ohms to 100.0 ohms (0 – 50 ohms on analog scale)
• Accuracy:  ±0.01 ohms to 9.99 ohms; ±3%;  ±2 digits 10.0 ohms to 99.9 ohms ±5%; ±2 digits
• Open Circuit Voltage: 5V ±1V
• Test Current:  205 mA, ±5 mA @ (0 – 10 ohms) > 20mA up to 100 ohms
• Zero Offset Adjust:     0 to 9.99 ohms

General 

• Power Supply:  6 x 1.5 V Alkaline cells IEC LR6 type
• Battery Life:  Typically up to 3500, 5 second tests
• Operating Temperature:  -10ºC to 55ºC
• Operating Humidity:  93% Relative Humidity at 40ºC max
• Storage Temperature:  -25ºC to 65ºC
• Dimensions: 195mm (L) x 98mm (D) x 40mm (H)
• Weight: 550g